Privacy policy.
Emulsion Cam is a film-simulation camera app for Android and iPhone. Both apps are built so that nothing leaves your phone unless you choose to share it. The only exceptions are services that Google and Apple run themselves, such as your phone’s backup; each app’s section below explains them.
This policy covers the Android app, the iPhone app and this website.
Both apps
- No account. You never sign up or sign in.
- Everything happens on your phone. Film looks are applied on the phone itself. Neither app uploads your photos or videos, or sends anything to us.
- No analytics, no ads. Neither app contains advertising, analytics or crash-reporting code, and neither tracks you.
The Android app
Data we collect
None. Emulsion Cam collects no personal data, no usage analytics, no crash reports and no device identifiers. The app has no internet access: it does not request the internet permission, cannot connect to the internet, and contains no advertising or third-party analytics SDKs.
If you installed Emulsion Cam from Google Play, Google may report aggregated crash and performance statistics to us through the Play Console, and the app asks the Google Play Store whether a newer version is available (to show it in the app’s About page, and so we can require an update when an old version would no longer work correctly). Both are performed by Google Play itself under Google’s privacy policy—the app sends nothing on its own.
Camera
Emulsion Cam uses the camera to take photos and record videos—that is the app’s sole purpose. Camera frames are processed on your device to apply film looks and are never transmitted anywhere.
Microphone
The microphone is used only while you record a video with sound enabled, and the recording is saved only into your own video file. If you decline the microphone permission, videos are simply recorded without audio. The microphone is never accessed outside an active recording you started.
Photos and videos
Your captures are saved to your device’s own gallery (DCIM/Emulsion Cam). Apart from files you pick or share to it, Emulsion Cam only reads back the files it created itself; it never asks for access to the rest of your photo library, and does not read or scan it.
Some files are kept inside the app’s private storage instead: the un-filmed originals (when Save Original is on), photos you import into the Darkroom, and the settings of your Darkroom edits. Other apps cannot read them, they are not included in backups, and they are deleted when you uninstall the app. An edited photo you save goes to your gallery, like a capture. Originals saved by versions before 1.5.0 are in DCIM/Emulsion Cam/Originals in your gallery and stay there until you delete them.
You can bring photos in two ways: the system file picker, which shares only the files you choose, or by sharing photos to Emulsion Cam from another app. A custom film (a .cube file) is added the same way, through the file picker.
Photos the app saves (film captures, edited photos, crops and prints) contain no location data and no device identifiers. They include a small embedded note with the film look and effect settings used, a date and time, and the lens focal length, so the app can display them later, and they name Emulsion Cam as the app that saved them. For a film capture, that date and time is when it was taken, with the phone’s time zone. An edited photo, crop or print also keeps the standard camera details of the photo it was made from: camera make and model, lens, exposure settings (such as shutter speed, aperture and ISO) and the date and time it was taken, with its time zone when that photo recorded one. It never keeps that photo’s location, serial numbers, owner name or other identifiers. Un-filmed originals keep the photo details the phone’s camera wrote into them, such as phone make and model, exposure settings and the date and time, and Emulsion Cam adds the phone’s time zone when the camera did not record one. They contain no location either. If you share an original, it is sent as the camera’s own file, with those details.
Photos you import are kept exactly as they are, with whatever details their file already holds, which can include where it was taken and the camera’s serial number. Emulsion Cam does not use the location or serial number, and never copies them, or the owner’s name, into the edited photos, crops or prints you save. If you share an imported photo itself, it is sent as the original file, with those details.
Sharing
When you share photos or videos, only the app you pick receives temporary, read-only access to the files you selected. What it does with them is up to that app.
How your data is kept safe
Everything stays on your device, except what you share and what Android’s backup copies. Files in the app’s private storage are protected by Android’s app sandbox, so no other app can open them. Sharing gives the app you chose access to the files you selected, and nothing else. Because the app has no internet access, it transmits nothing itself.
How long data is kept, and how to delete it
We receive no data from the app, so we keep none. Your files stay on your device until you delete them: photos and videos in your gallery like any others, and the files inside the app from the app’s gallery. Uninstalling the app, or Android’s “Clear storage” for it, removes everything in its private storage, settings included. Photos and videos in your gallery stay.
Backups
Android’s standard backup service may include the app’s settings and your custom films in your device’s Google backup, under Google’s backup terms, and copy them when you move to a new phone. This is handled by Android, not by us, and can be turned off in your device’s backup settings.
The iPhone app
Data we collect
None. Emulsion Cam for iPhone collects no personal data, no usage analytics, no crash reports and no device identifiers, and it does not track you. It has no networking code of its own, and it contains no advertising, analytics or other third-party code. The only web pages it opens are PRIVACY POLICY and SUPPORT in its settings, which open this website in your browser.
Camera
Emulsion Cam uses the camera to show the viewfinder, take photos and record videos—that is the app’s purpose. iOS asks for your permission when the camera first starts. Camera frames are processed on your iPhone to apply film looks and are never sent anywhere.
Microphone
The microphone is used only in video mode, while MICROPHONE is on in the app’s settings (it is on until you turn it off). iOS asks for your permission the first time it is needed: when you first record a video, or turn MICROPHONE on in video mode. The sound is saved only into the videos you record. If you decline, or turn MICROPHONE off, videos are recorded without sound. In photo mode the microphone is not used.
Photos and videos
Saving. Photos and videos you take, and photos you save from the Darkroom, go to your Photos library. The first time the app saves, iOS asks you to let it add to your library. That permission only adds: it does not let the app see your library.
The Lightbox. The app’s Lightbox shows the photos and videos it saved. To show them it has to read your library, so it asks for that only when you tap “Allow Photos access” there (or, before that, if you choose Replace in the Darkroom). You can allow full or limited access. With full access, the app also keeps its photos and videos together in an “Emulsion Cam” album. Either way, it looks only at the photos and videos it saved itself: it keeps a list of them (see What the app keeps on your iPhone) and asks Photos for those items only. It does not read, scan or upload the rest of your library.
The app changes your library only when you ask it to: it adds what you save, sets the favourites you mark in the Lightbox (they are Photos’ own Favourites), replaces an edited copy it saved earlier when you choose Replace in the Darkroom, and deletes what you delete in the Lightbox. Before anything is deleted, iOS asks you to confirm.
Photos from elsewhere. To edit a photo the app did not take, you choose it in Apple’s photo picker or in the Files picker. Both share only the photo you choose and need no access to your library. A custom film (a .cube file) is added the same way, through the Files picker.
iCloud Photos. If you use iCloud Photos, Apple syncs what the app saves to iCloud like any other photo, and Photos may download a full-size copy from iCloud when the Lightbox shows, plays or shares one. That is Apple’s service, under Apple’s terms; nothing is sent to us.
Location
LOCATION in the app’s settings is off until you turn it on. The first time you do, iOS asks whether Emulsion Cam may use your location while you are using the app. If you say no, LOCATION switches back off.
While LOCATION is on, the app follows your location only while the camera is open, asking iOS for an accuracy of about ten metres. Each photo or video you take is then saved to your Photos library with the place it was taken (latitude and longitude, altitude when known, accuracy and time), so Photos can show it on its map. Photos taken with a film or effects, and their kept originals, also carry the place inside the file, in its GPS details. The app sends your location nowhere and stores it nowhere else: it goes only into the photos and videos you take.
With LOCATION off, the app adds no location to anything it saves.
What saved photos contain
Photos the app takes keep the details the iPhone’s camera writes into every photo, such as the phone model, lens, exposure settings and the date and time. A photo taken with a film or effects also gets a small note with the film and effect settings used, the lens focal length and the exposure setting, and names Emulsion Cam and the film in its description. It adds nothing that identifies you or your phone, and adds the place only as described under Location.
The Darkroom
Photos you bring into the Darkroom are copied into the app’s own storage on your iPhone exactly as they are, with whatever details their files hold, which can include where a photo was taken and the camera’s serial number. When ORIGINAL is on in the settings (it is off until you turn it on), the app also keeps there an unfiltered copy of each photo you take, for editing in the Darkroom. The settings of your Darkroom edits are kept there too.
Photos you save from the Darkroom (edited photos, crops and prints, in JPEG, HEIF or TIFF, whether saved as a new photo, replacing an earlier Darkroom save, or shared) contain no location data and no device identifiers. The app writes their details from a fixed list: the camera make and model; the lens make, model and focal-length range; the exposure settings (shutter speed, aperture, ISO, exposure compensation, exposure program, metering mode, flash and white balance); the focal length; when the photo was taken, with its time-zone offset; and a note with your edit settings. It never copies the original photo’s location, camera or lens serial numbers, owner or artist name, copyright notice, unique image ID, maker notes or other embedded data. This holds even for photos taken with LOCATION on: the photo in your library keeps its place, but Darkroom saves made from it do not.
Deleting a photo in the Darkroom removes it, with its edit settings, from the app. Turning ORIGINAL off keeps the originals already kept.
What the app keeps on your iPhone
- Your settings, and the Lightbox’s and Darkroom’s view options.
- A list of the photos and videos it saved, so the Lightbox can find them: for each, its Photos identifier, the film, lens focal length and exposure setting, the colour label you give it, and when an edited copy was saved.
- Your custom films, with the names and colours you give them.
- The Darkroom’s photos, kept originals and edit settings.
All of it stays on your iPhone, inside the app, where iOS keeps it private from other apps.
Sharing
When you share photos or videos, iOS’s share sheet gives the app you pick only the files you selected; what it does with them is up to that app. From the Lightbox, each photo or video is sent as the file saved in your Photos library, with its details, including the place if the file holds one. From the Darkroom you can also share an edited photo, or save it to Files.
Backups
If you back up your iPhone to iCloud or to a computer, the backup includes everything the app keeps on your iPhone (listed above), as iOS does by default; the app leaves nothing out. Backups are made by Apple, under Apple’s terms, not by us. Darkroom photos, especially RAW files, can make a backup noticeably larger. You can leave Emulsion Cam out of iCloud Backup in your iPhone’s iCloud settings. Photos and videos in your Photos library are backed up or synced by Photos and iCloud like any others.
How long data is kept, and how to delete it
We receive no data from the app, so we keep none. Photos and videos in your Photos library stay until you delete them, in the Lightbox or in Photos. Inside the app, Darkroom photos stay until you delete them in the Darkroom, and custom films until you delete them from the film shelf. Deleting the app removes everything it kept on your iPhone, settings included; photos and videos in your Photos library stay. Copies in earlier backups stay until those backups are replaced or deleted.
App Store and TestFlight
If you install Emulsion Cam from the App Store, Apple gives us aggregated statistics such as download numbers, and crash reports and usage statistics only from people who chose to share analytics with app developers (in the iPhone’s Settings, under Privacy & Security › Analytics & Improvements). If you test the app through TestFlight, Apple shows us your device model and iOS version, how often you use the app, crash reports and any feedback you choose to send, and, if we invited you by email, the name and email address we invited you with. Both are done by Apple under Apple’s privacy policy; the app sends nothing on its own. We use what Apple gives us only to fix and improve the app, and you can ask us to delete anything about you.
This website
This site is a set of static pages with self-hosted fonts. Our host records standard server logs (such as IP address and requested page) for security and reliability, as any web server does.
Google Ads tag, only with your consent. To measure whether our advertising brings visitors here, we use the Google tag (gtag.js) from Google Ireland Limited, Gordon House, Barrow Street, Dublin 4, Ireland. It loads only after you choose “Accept” in the cookie banner (legal basis: your consent, Art. 6(1)(a) GDPR and § 25(1) TDDDG). Google then sets cookies and receives data such as your IP address, browser details, the pages you visit and whether you clicked through to Google Play. Google may process this data in the United States; Google LLC is certified under the EU–US Data Privacy Framework. See Google’s privacy policy and how Google uses data from partner sites.
If you decline, the tag is never loaded and no cookies are set. Your choice is stored only in your browser. You can change or withdraw it at any time under Cookie settings, also in the footer of every page.
Children
Neither app collects data from anyone, including children.
Your rights
Under the GDPR you may request access to, correction or deletion of personal data about you, and lodge a complaint with a supervisory authority. The apps collect no personal data. We have personal data about you only if you email us or if Apple passes it on from TestFlight (see App Store and TestFlight), and this site collects it only through the Google tag described above, if you accept it. For data Google or Apple holds, you can also contact them directly. You are always welcome to ask.
Changes
If this policy ever changes (for example, if a future version of either app adds an online feature), the updated policy will be posted at this address, which both apps link to, before the change ships.
Contact
The controller responsible for data processing is:
Dovlet Annayev
c/o GAM
Pappelallee 64
10437 Berlin
Germany
Email: emulsionlab.dev@gmail.com